Some might say “PPG’s Boxwood Green paired with Wimbledon White is perfection”

Hundreds of hours spent perfecting the laser straight panels and award winning finish.

Vintage luxury styling with modern comforts

The interior consists of diamond stitched leather heated seats with matching side panels/headliner/dash cover/center arm rest/window surrounds/cup holders and rear jumper seats, power windows, Dakota Digital instrument cluster, a wood steering wheel with a tilt column, Vintage Air heating and A/C, fully insulated and sound deadened interior, dome lighting and Bluetooth controlled accent lighting, 6 point family style roll cage, Rockford Fosgate speakers and 12” subwoofer paired with amps mounted inside rear folding seat

“It’s all in the stance”

Sitting on a custom James Duff 4 link suspension, 5.5” James Duff lift kit with quad front and rear shocks, progressive rate coils, extended long travel radius arms and a Hellwig sway bar system to keep it tight on the road!

It's all in the details




  • Two-tone Wimbledon White and Boxwood Green paint
  • Hardtop (media blasted and painted two tone – Wimbledon White and Boxwood Green) (custom rubber gaskets to protect paint, welded flat bar metal supporting bracket under quarter panel with rivet nuts for easy install and removal) 
  • Full Bestop Softtop (full soft doors)
  • Family-style full bikini top
  • Custom painted Ford letters and fender emblems
  • AMP Research Powersteps (with LED lights and custom welded supports) 
  • LED headlights (original style)
  • The list goes on…

1973 Ford Bronco Build Sheet, Boxwood Green

Paint and Body Details

This is a nut and bolt (frame off restoration).  It features a brand-new Dennis Carpenter/Dynacorn body built by BCB Restorations.  Subsequent to the body build, the body was media blasted and epoxy coated, followed by the Raptor Lining of the undercarriage and firewall.  Hundreds of hours were dedicated to making the body straight and panels align seamlessly so the Boxwood Green and Wimbledon White would have that show car finish. The vehicle was painted in Ford’s Original PPG Boxwood Green and heavily clear-coated with SPI’s clear coat for a show-car finish.  Lastly, this Bronco received over eighty (80) hours of precise wet sanding and buffing work in order to achieve a show car finish, featuring laser straight panels and a brilliant shine.

Exterior Body Features


  • Two-tone Wimbledon White and Boxwood Green paint
  • Hardtop (media blasted and painted two tone - Wimbledon White and Boxwood Green) (custom rubber gaskets to protect paint, welded flat bar metal supporting bracket under quarter panel with rivet nuts for easy install and removal)
  • Full Bestop Softtop (full soft doors)
  • Family-style full bikini top
  • Custom painted Ford letters and fender emblems
  • AMP Research Powersteps (with LED lights and custom welded supports)
  • LED headlights (original style)
  • Chrome headlight bezels with an inside stainless steel surrounds
  • Stainless steel tail light bezels
  • Parking lights (adapted to the ‘smaller’ earlier style)
  • Additional (customizable) LED tail lights, parking lights, and license plate bulbs included with sale
  • Shortened, satin-black hood latch
  • Front and rear body gap filler panels
  • All hardware was replaced with new stainless steel screws and bolts
  • Stainless fender and quarter panel braces
  • Stainless fender wheel well protectors (installed with rivet nuts for easy removal)
  • Body matching fender flares with hidden gasket and contrasting silver rivets
  • New chrome door/liftgate handles, mirrors
  • Stock style chrome bumpers
  • New glass and rubber gaskets (windshield, hardtop, doors, etc.)
  • New body molding/trim
  • New tail light lenses and buckets with wiring
  • Stainless wiper arms, stainless wiper blades, stainless hood spray nozzles, new wiper motor, and black powder coated wiper linkage system.
  • 15” Pro Comp 69 Vintage polished aluminum wheels (15x10 3.625BS)
  • 50R15LT Mickey Thompson Baja MTZ Tires
  • Hood and Liftgate shocks with stainless hardware
  • Tailgate with custom shock assist (for soft open and close mechanism)
  • Tailgate anti theft post, anti rattle and silencer rubber hinges
  • Stainless handle/stainless license plate holder
  • Rear-view camera

Interior Features

  • One-of-a-kind, handmade metal center console in Satin Black. The center console fashions epoxy coated African Waterfall Bubinga Wood, featuring black stainless cup holders, a wireless phone charger, two (2) USB charging ports, seat heater buttons, locking top, and billet knob twin sticks. The console holds a floating double din stereo with underneath accent lighting. The rear, floating portion of the console includes matching, upholstered stainless cup holders with underneath accent lighting.
  • Custom metal panel built to fit between the center console and directly below the dash, includes the front and rear locker switches and ARB compressor switch.
  • Custom, Diamond-Stitched leather seats inclusive with dual-temp seat heaters
  • Custom, matching upholstered door panels, quarter panels, dash cover, center console armrest, center and rear cup holders, rear tailgate seats, twin stick cover, kick panel speaker pod, hardtop sides, hardtop headliner.
  • 3 point retractable front seat belts and 2 point rear seat belts
  • Double-folding rear bench seat with inside mounted stereo amplifiers. When folded, there is ample room in the cargo section.
  • Complete stereo system featuring Alpine ilx650 double din head unit with bluetooth connectivity, front sealed kick panel “Rockford Fosgate” speakers (fabrication done to the kick panel metal to make the speakers sit flush at an angle toward the passengers. Rear “Rockford Fosgate” speakers and 12” “Rockford Fosgate” subwoofer are hidden under the upholstered quarter panels and sound is allowed through the thin black material. Fiberglass box enclosures built for the rear speakers and subwoofer.  A 4-channel amplifier and mono amplifier for the stereo system is located under the rear seat.
  • Unique dash layout in matching Boxwood Green paint features a Vintage Air AC and Heat System paired with Billet Aluminum vents, climate control panel, and steering column bezel. Dash also details a Dakota Digital VHX instrument panel (“speedometer”), and satin-powder-coated windshield knobs.
  • Chrome column-shift tilt steering column with epoxy-coated wood steering wheel provides a modern comfort with a classic look.
  • Brand new Centech Wiring Harness with all new switches, custom mounted relays (located inside glove box for convenience), fuses, bluetooth RGB light controller, and engine management controller.
  • Entire interior including hardtop, doors and tub is insulated and layered with Kilmat sound deadener, heat/sound closed-cell foam and foil insulation providing a heat and sound barrier for a more comfortable ride.
  • Insulation is covered by thick, black cut-pile carpet throughout the interior for a clean and classy look. Carpet is held down with an aluminum trim kit.
  • Doors include Nu-Relics power window kit using original window crank for a vintage look. All new, window felt tracks and door latches throughout the vehicle.
  • Interior hardware consists of matching hand-polished stainless steel.
  • New limit door straps conceal wiring
  • Black, powder-coated ‘family style’ roll cage with custom lights installed
  • LED front and rear interior dome lights are custom-placed within the rollcage and connect to door jamb switches, which turn on automatically when the door opens. The placement of these lights inside of the roll cage allows for light when the hardtop is removed.  Lights are also connected to a separate interior switch, which provides the option to be used when doors are closed.
  • **Secondary accent RGB LED lighting system installed underneath the dash, center console, and rear quarter panels. These courtesy lights have the option to be controlled via an “app” or via remote which is included.  The RGB LED lights can produce any color of your choice, and dimmed to your liking.  This additional feature provides the ability to create whatever atmosphere you desire.**
  • **This truck has a custom tailgate with shock assist (for soft open and close mechanism) which include two (2) attached matching upholstered folding seats divided by a matching upholstered cup holder console, which fold up and stay in place when shutting the tailgate. This additional seating is perfect for family and friends. A courtesy matching cooler is included in the cargo section of the Truck, so you can easily access your favorite beverage.  A convenient USB port is located in the back quarter panel.


Ford 331 Stroker Motor

  • 500 horsepower built motor
  • COMP Cams SK35-514-8
  • MSD DynaForce Starter
  • MSD Blaster HVC-2 Coil
  • MSD Ignition 6AL
  • MSD Atomic EFI (professionally tuned) d
  • Trick Flow Aluminum Heads (58cc Twisted Wedge)
  • Scat Rods and Twisted Wedge Pistons (Part No. 14855-030)
  • Scat Performance Crankshaft
  • Clevite Bearings (MS-590 P)
  • MSD 8.5mm Spark Plug Wires
  • MSD Distributor (Part No. 8582)
  • Comp Pro 1.6 Roller Rockers
  • 5:1 Compression on 91 Octane
  • High Performance Dampener
  • Moroso Chrome Valve Covers
  • Moroso Air Cleaner
  • Edelbrock RPM Air Gap Intake Manifold (Powder-coated black)
  • PCV Valve System
  • Sanden 7176 Polished AC Compressor
  • Aluminum Plug Brackets
  • Headers (High-heat ceramic coated) (Ramflex graphite gaskets with stage 8 locking collector bolts)
  • Custom Exhaust System with Resonators and Magnaflow Mufflers
  • Explorer 5.0 Accessory Serpentine Setup
  • Upgraded Saginaw Power Steering Pump
  • Wild Horses Custom Saginaw Pump Bracket
  • Brand new Alternator, high flow water pump and thermostat
  • Brand new laser-adjusted Serpentine Belt
  • Explorer-style mechanical fan and clutch
  • Brand new premium battery, bracket and tie downs
  • Custom high capacity oil pan and oil pickup tube
  • Stainless steel throttle linkage


  • C4 Automatic Transmission
  • New high performance torque converter
  • New high performance flywheel
  • New transmission lines
  • Derale Transmission Cooler
  • Stainless steel kickdown cable


  • HS Customs Front and Rear Drivelines
  • New u-joints and constant velocity joints

Transfer Case

  • Dana 20 fully Rebuilt with new gears, gaskets and seals (fully disassembled, sandblasted and powder coated)
  • Aluminum t-case cover and output retainer
  • Stainless Steel Twin Sticks


  • Suspension built on an original frame that was sandblasted, reinforced, zinc coated and then powder coated.
  • James Duff rear four-link suspension system (powder-coated silver)
  • James Duff extended long travel radius arms (powder-coated silver)
  • James Duff 5.5” progressive rate coil springs (powder-coated silver)
  • James Duff 4 Front 4 Rear 70/30 auto adjusting shocks (Chromed)
  • James Duff rear sway bar system for 4 link
  • James Duff heavy duty coil spring towers and retainers
  • James Duff long travel shock towers
  • James Duff 2” billet body lift kit
  • All new heavy-duty bushings and ball joints
  • Hellwig front anti sway bar system


  • Front Disc Wilwood Forged Dynapro 6 Big Brake Kit
  • E-stopp push-button Electronic E-brake
  • All new Brake Lines with Aluminum Brackets
  • Hydroboost System with Wilwood Master Cylinder
  • Wild Horses Proportioning Valve
  • Restored (sandblasted and powder coated) brake and gas pedal assembly with new bushings


  • PSC Built Steering Box (Part No. SG-285287) ported for Ram Assist
  • PSC Hydraulic ram assist (included but not installed)
  • Custom-built Tie Rod, Trac Bar, and Drag Link with heim joints
  • Flaming River Steering Adapters and Adjustable Column shaft


Front Axle

  • Dana 44 (sandblasted and powder coated then assembled by Sexton Offroad)
  • High performance Yukon ring and pinion gear set 4.56
  • Yukon master overhaul kit
  • Yukon Hardcore locking hub set
  • Yukon Zip air locker
  • Welded Wild Horses Trac bar riser
  • ARB on-board high performance 12 volt air compressor

Rear Axle

  • Ford 9” (sandblasted and powder coated then assembled by Sexton Offroad)
  • High performance Yukon ring and pinion gear set 4.56
  • Yukon master overhaul kit
  • Ten Factory alloy 31 spline axles
  • ARB air locker
  • James Duff welded 4 link truss system on 9” rear
  • ARB on-board high performance 12 volt air compressor

Fuel System

  • M1A1 Stainless 23 gallon tank with in tank EFI fuel pump kit
  • New fuel lines with stainless clamp from BC Broncos
  • Adjustable fuel pressure regulator with WH Gauge
  • Sandblasted and powder coated fuel neck setup
  • Stainless fuel cap
  • New rubber tank filler hose and breather hose

Cooling system

  • 4 core aluminum radiator (Tom’s Offroad)
  • Full Circle aluminum fan shroud (Wild Horses)
  • New rubber radiator hoses (Explorer-style)
  • Radiator/washer fluid reservoir combo with new fluid pump
  • Stainless Steel air dam with built in tool trays

Contact Information

Location: Slc, Utah
Phone number: +1 (801) 792 6797

Website designed and developed by Belotti Design Studio